BIOS dump for a motherboard numbered 6050A2725001, revision A01, saved as a raw 8 MB binary, matching the 8mb tag in the name. The 6050A prefix follows the Inventec numbering pattern used on many HP and other OEM laptop boards. The image is meant to be written to the SPI flash chip with a hardware programmer such as a CH341A or RT809H. Before flashing, confirm the board number and revision printed on the PCB, read and save the original chip contents, and check that the chip capacity is 8 MB, since an image of the wrong size will not fit.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bioshub. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →