BIOS dump marked as working for motherboard 6050A2728501-MB-A01, an Inventec numbering pattern with A01 as the board revision. The file is 8 MB, fitting a 64 Mbit SPI chip. A tested image like this is used to reflash a dead or corrupted board with an external programmer. Note that a second copy of 16 MB exists for the same board, so check which flash size your board actually carries. Confirm the PCB number and revision, and back up the original chip before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →