BIOS image for board 6050A2854301, revision A01, labelled fast boot, which suggests the fast boot setting was enabled when it was saved. The 6050A pattern is the Inventec numbering used on HP notebook boards, though the model is not named. At 16 MB it fits a 128 Mbit SPI flash chip. Program it with an external programmer after checking that the PCB carries the same number and revision. Back up the original chip first, since serial and model data may differ.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →