Firmware image of 2.00 MB in raw .bin form, named only with the token 620A, so the exact device and board are not identified. The size corresponds to a 16 Mbit SPI flash chip, and the A suffix is not explained by the name. Before using it, compare the label on the original BIOS chip and the board number printed on the PCB with whatever source this dump came from. Always read and save the existing chip contents with a programmer such as a CH341A first, then write and verify the image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →