Intel ME 7.0.0.1152 firmware, 5MB SKU, production signed, provided as a clean RGN region image of 4.99 MB. On 6-series Sandy Bridge era chipsets the 5MB firmware is the full featured variant with AMT, unlike the smaller 1.5MB edition, and the two are not interchangeable. Repairers use it to restore a corrupted ME region, typically configuring it in Intel FIT before merging into the BIOS image. Confirm the board originally ran 5MB firmware and back up the flash chip first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 9 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →