Firmware dump packed in a 4.51 MB RAR archive for the NS4SL01 mainboard, revision 1.3, also labelled with the code 71R-NS4SL6-T813, which looks like the assembly part number printed on the PCB. The image is intended for reprogramming the SPI flash holding the BIOS when a board fails to start. Before writing, back up the existing chip with your programmer, verify the board number and revision silkscreened on the PCB, and confirm the extracted file size matches the flash capacity so it fits correctly.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 17 Mar 2021 | Open file on RM Schematics |
| @abgm_manutencao_esquemas | 23 Oct 2021 | Open file on RM Schematics |
| @Satale_bios_esquemas_Laptop | 2 May 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →