Second copy of the 8560 BIOS read taken from a Winbond W25Q64 flash chip, 8 MB in size and stored as raw binary. The name also carries 20161210, probably a date, and the number 33951. Comparing this copy with the first confirms that the dump is consistent before you use it for recovery. Write it only to a 64 Mbit SPI chip, check the board revision against the source unit, and keep a backup of the current chip contents.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →