Production ME region image, version 9.5.15.1730, for the 1.5MB consumer firmware SKU of Intel's ME 9.5 series. A technician uses it to replace a corrupted or dirty Management Engine region in a full SPI dump, typically with FITC or UEFITool, before flashing with a programmer. Do not use it on boards that need the 5MB SKU. Check that the ME region size in the descriptor matches, and keep the untouched original dump in case the rebuilt image fails.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 14 Oct 2018 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →