Intel ME firmware binary, version 9.5.15.1730, for the 5MB SKU, marked PRD RGN, which means a production region image. The 5MB firmware is the corporate variant, used on boards whose chipset supports the full feature set. Technicians use it to rebuild a damaged ME region inside a BIOS dump. The 5MB and 1.5MB firmware are not interchangeable, so confirm which SKU your system uses, check the region size in the flash descriptor, and back up the original chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 14 Oct 2018 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →