Production region image of Intel Management Engine firmware, version 9.5.3.1520, for the 1.5MB consumer SKU. It is used to restore a corrupted or misconfigured ME region inside a full BIOS dump, which can cure boot delays, fans running at full speed or ME error messages on affected boards. Inject it with FITC or a similar tool, never flash it on its own to the whole chip. Confirm the platform runs ME 9.5 1.5MB firmware and back up the original flash first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 14 Oct 2018 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →