Intel ME firmware binary, version 9.5.3.1526, with SLM in the name, most likely the slim SKU, and PRD EXTR, likely a production image extracted from a dump. At about 1.1 MB it is smaller than the standard 1.5MB region. It can serve as a clean source when rebuilding an ME region in a BIOS image. Only use it on platforms that run the same SKU, confirm the region size in the flash descriptor and keep the original dump for fallback.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 14 Oct 2018 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →