A520-DA0QU5MB8C0-N13M-GE2-AIO-A1-U32 Lenovo

BIOS .bin 8.00 MB Shared

Lenovo A520 AIO firmware, 8 MB, taken from flash position U32 on the Quanta-made DA0QU5MB8C0 motherboard, revision A1, with NVIDIA N13M-GE2 graphics. Technicians use such a dump to revive a board that powers on without display or loops after a bad BIOS flash. Quanta identifies its boards with a DA0 code printed on the PCB, so check that the silkscreen matches before writing. Read the existing chip and store the copy, then write and verify this image with a CH341A or similar tool, keeping it separate from the U22 file.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @abgm_manutencao_bios. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files