SPI dump sized 2 MB for the IH110ST1 rev 1.0 board used in the A530 all-in-one, with the AIO 700-24ISH and B5150 named as related models. The W25Q16V marking indicates it belongs to the 16 Mbit Winbond chip rather than the main 8 MB BIOS flash. Use it to restore that secondary chip with a CH341A, RT809 or similar programmer. Back up the original before erasing, verify the written data, and make sure the part on the board really is a 2 MB device, since mismatched images will not fit or boot.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @abgm_manutencao_bios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →