BIOS dump for the Acer Aspire 1410 on Quanta board DA0ZH7MB8C0, the ZH7 project, with the name adding the number 16440 and a source site tag. The 2 MB binary fits a 16 Mbit SPI flash. Quanta writes these numbers as DA0, project code, MB and revision code, so the PCB print should match before you flash. Use an external programmer for recovery when the netbook shows no image or will not boot, and keep the original read so you can revert.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @abgm_manutencao_bios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →