Tested BIOS image for Acer Aspire 4750, 4750G and 4752 laptops on the JE40-HR board, with identifiers 10267-4 and 48.4IQ01.041. The 4 MB binary fits a 32 Mbit SPI flash chip. Since one board design covers several model variants, check the board code and revision on the PCB before programming. A raw dump like this is used to recover a laptop with no display or a boot loop after a failed update. Read and save the existing chip first, then verify after writing with your programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →