BIOS dump for the Acer Aspire 5920, labelled HBM without GPS, which indicates the source board variant lacked the GPS option. The 1.00 MB binary corresponds to an 8 Mbit SPI flash. Check that your board matches this variant and that the chip capacity is the same before writing. A file like this is used to restore corrupted firmware by programming the chip off-board or with a clip. Back up the existing contents first, then flash and verify with an external programmer before reassembly.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @abgm_manutencao_bios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →