Firmware image for the Acer Aspire E1-471G read from the chip at U6. This 2 MB file is the counterpart to the larger dump from U8 on the same board. It fits a 16 Mbit SPI flash and must be written back only to the U6 position. Use a boardview or schematic to confirm which chip is U6 on your PCB. Read and keep the original contents with your programmer first, because writing the wrong image to either chip will prevent a normal boot.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →