Firmware for the Acer eMachines G630 using the Compal LA-5991P board, rev 1.0; KBWH0 is the model code noted in the name. Compal identifies its designs with LA- numbers, and this board was shared across several eMachines AMD models. The 784 KB RAR contains the flash image. Use it to recover a dead board by programming the BIOS chip externally. Verify the revision on the PCB, save the existing chip data first, and check that the image size matches the chip capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 4 Sept 2018 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →