BIOS dump for an Intel G41 chipset micro-ATX desktop board H-IG41, revision 1.1, read from an MX25L8005 flash chip. The 1 MB size equals the 8 Mbit capacity of that Macronix device. Technicians write it to revive desktop boards that power up without display after BIOS corruption. Use a programmer supporting the MX25L8005, check that the PCB is marked H-IG41 revision 1.1, and back up the current chip so any board-specific data such as the LAN MAC can be restored.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @afsbiosfree. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →