SPI flash image for an H110D4-M1 motherboard, Intel H110 chipset, where D4 in the model most likely indicates DDR4 memory support. The file measures 8 MB, matching a 64 Mbit chip. It serves as a recovery image when the existing firmware is corrupted and the board fails to POST. Before programming, save a backup of the chip's current contents, check that the chip capacity matches, and confirm the board model printed on the PCB, then verify the write against the file once it has finished.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @afsbiosfree. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →