Firmware dump for an H110M-C board, Intel H110 chipset, with D3 and v1 in the name. D3 most likely means the DDR3 memory variant and v1 the board revision, both worth checking against the PCB itself. The 16 MB image is intended for a 128 Mbit SPI flash chip. It is used when a board will not POST or loops on power-up because of corrupted firmware. Back up the original chip contents first, then write and verify the image with a hardware programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @afsbiosfree. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →