Corrected outimage dump for an H110M-CPS board using the Intel H110 chipset, described in the name as fixed, which suggests it was repaired or rebuilt after a fault. An outimage is normally a complete flash image that includes descriptor, ME and BIOS regions rather than a capsule update file. At 16 MB it targets a 128 Mbit SPI chip and is written with an external programmer. Keep a backup of the original chip before flashing, and check that the board model printed on the PCB matches this image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @afsbiosfree. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →