Firmware image for the H310M S2H motherboard, revision 1.1, 16 MB in size. The board uses the Intel H310 chipset and the dump covers the whole SPI flash, so it can be programmed directly for recovery after a failed flash or corruption. The revision stated on the PCB, usually printed near the slots, must read 1.1, since images for rev 1.0 are separate. Read the original chip with your programmer first and store the copy, as it can contain the board MAC and serial data.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @afsbiosfree. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →