Firmware dump for an H61MXP desktop board using the Intel H61 chipset for Sandy Bridge and Ivy Bridge processors. At 4 MB it matches a 32 Mbit SPI flash chip, the size common on boards of that generation. Programming it with a CH341A or similar tool can revive a board with no POST caused by bad firmware. Confirm that the chip capacity on the board is also 4 MB, check the board model printed on the PCB, and save the existing contents before writing this image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @afsbiosfree. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →