Firmware image for the Haier X3 notebook mainboard numbered 15BFR1-010300, an 8 MB binary listed under Clevo. Note that this board code differs from the 15BFR1-011000 variant, so the two dumps should not be treated as interchangeable. Typical use is SPI flash recovery with an external programmer on a laptop that is dead, beeping or stuck before POST. Compare the board number printed on the PCB, verify the flash capacity is 8 MB, and read out and store the existing chip contents before erasing it.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @afsbiosfree. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →