AFS HCL Ultrasmart M3074 B14Y Rev-2.0

BIOS .bin 8.00 MB Shared

BIOS dump for an HCL Ultrasmart M3074 with board code B14Y, revision 2.0. The 8 MB size corresponds to a 64 Mbit SPI flash chip. Technicians use this image to repair systems that are dead, show no display or loop at startup after a corrupted update. Program it with an SPI programmer, after verifying that the board marking and revision 2.0 match the PCB. Read the existing chip first and keep the backup, since it may contain serial numbers or network identifiers specific to that unit.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @afsbiosfree. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files