BIOS dump for the Lenovo Ideapad 130-15IKB built on Compal board LA-G202P, revision 1.0, supplied as an 8 MB raw binary. The name marks the Management Engine region as cleaned, so the image should boot without carrying over another machine's ME state. Compal uses the LA-xxxxP pattern for its laptop mainboards. Confirm the board number and revision on the PCB, read and save the original SPI chip with a programmer such as a CH341A first, and make sure the 8 MB image matches the capacity of the installed flash chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @BiosSupport2006. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →