Firmware image labelled for the Acer Aspire One AO571h, delivered as a raw 1 MB binary with no board number or revision in the name. A dump of this size suits an 8 Mbit SPI flash and is normally used to recover a board that powers on with no picture or is stuck after a failed update. Because the mainboard is not identified, check the board code printed on the PCB against a trusted reference before writing. Always back up the original chip with your programmer and verify the write afterwards.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @abgm_manutencao_bios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →