Early Apollo Lake firmware component, APL version 0.1.0.0, revision B, production build dated 2016-08-10. At 64 KB it is a module rather than a full flash image and is intended to be embedded in the platform firmware of Apollo Lake devices. Its main value is in firmware research, comparing module dates, and repair image reconstruction. Prefer later builds for fixes, verify the board is an Apollo Lake design, and always read and store the existing SPI chip before reprogramming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →