Production firmware component for the Apollo Lake platform, labelled APL with version 0.1.0.0, revision B and build date 2019-02-04. At 64 KB it is a sub-module rather than a full flash dump, typically embedded in the Intel firmware image of Apollo Lake boards. It helps when identifying the build present in a dump or repairing a damaged section. Make sure the target device is Apollo Lake based, and keep a verified read of the original SPI chip before writing any rebuilt image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 6 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →