Firmware dump for the Apple iMac 27-inch A1312, logic board 820-2828-A, read from an MX25L6406E SPI flash chip and marked as tested OK, supplied as a 3.53 MB ZIP archive. Apple numbers logic boards with the 820 prefix. The image is used to restore the EFI boot ROM with a programmer when the machine fails to chime or start. Compare the board number on the PCB, back up the original chip first, and confirm the file matches the 8 MB capacity of the MX25L6406E.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 5 Sept 2023 | Open file on RM Schematics |
| @generalbios | 12 Oct 2023 | Open file on RM Schematics |
| @generalbios | 15 Oct 2023 | Open file on RM Schematics |
| @generalbios | 19 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @generalbios | 29 Oct 2023 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →