Apple iMac 27 Late 2013 (820-3481-A) Clear me

BIOS .bin 8.00 MB Shared

Cleaned EFI firmware for the Apple iMac 27 inch Late 2013 on logic board 820-3481-A, the Clear me note implying the image was prepared without the original machine data. Its 8 MB size matches the full SPI flash chip. Such clean images are used for recovery when the original dump is lost or corrupted, after which the serial and related data are usually restored. Check the 820 number on the board, back up whatever the chip currently holds, and program it with an external programmer.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @abgm_manutencao_bios. Enginerys does not host this file.

All sources (3)

The same file was posted more than once. If one link is dead, try the next.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files