BIOS image for the ARDOR Gaming RAGE R16-R7ND403 laptop, stored as a raw 32 MB binary. The name gives no board number or chipset, so find the board label on the PCB and compare it with any matching schematic before you flash. A raw dump like this is written with an SPI programmer to a 32 MB flash chip. A smaller chip will not accept it. Always read and save the existing chip contents before writing, so the original data can be restored.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @Boardviewno. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →