Modified BIOS image for the ASRock H110M-DVS motherboard, revision 2.0, patched to allow Xeon E3 v5 processors to run on this consumer H110 board. The file is an 8 MB raw .bin, which matches a 64 Mbit SPI flash chip, and is written with a programmer such as a CH341A. Read and save the original chip contents before flashing, because a full image can overwrite board-specific data such as the MAC address. Confirm that the board revision printed on the PCB is 2.0.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_xeon_e3v5. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →