Firmware for the ASRock H91M-XT Plus desktop board, revision 2.02, packed in a 3.15 MB RAR. It is useful for recovering a board with a corrupted flash by writing the image to the SPI chip with a programmer such as a CH341A or RT809. Because a 1.00 revision of the same board also exists, confirm the revision on the PCB first. Read and keep the current chip contents, and check that the extracted image size matches the installed flash before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 7 Sept 2022 | Open file on RM Schematics |
| @biosarchive | 7 Sept 2022 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →