Firmware dump for the ASUS 1025C netbook; the name gives no board revision or status. It is a 2 MB raw binary sized for a 16 Mbit SPI flash chip and is programmed using a hardware flasher with a clip or after desoldering the chip. Use it to restore boards that fail to start because of damaged firmware. Verify the board markings on the PCB, read and keep the original contents before writing, and check that the programmer verifies the write correctly.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @abgm_manutencao_bios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →