Firmware image for an ASUS A555L built on the X555LD motherboard, revision 3.3, labelled OK by its source, suggesting it was tested on a working unit. The file is an 8 MB raw .bin intended for direct SPI programming rather than a vendor update tool. Technicians use dumps like this to recover boards stuck with no display or boot loops caused by corrupted firmware. Match the PCB revision exactly, back up the existing chip first, and verify the write after programming to rule out bad contact with the clip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @abgm_manutencao_bios. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @abgm_manutencao_bios | 7 Aug 2019 | Open file on RM Schematics |
| @abgm_manutencao_bios | 23 Oct 2021 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →