Flash dump for the ASUS DSL-AC51 router, hardware version A, for a 16MB flash chip and stored in a RAR of about 10.4 MB. A full chip image like this is used to revive a router bricked by a failed firmware update, when the web or recovery interface no longer responds. Write it with an external programmer to the SPI flash on the board. Read the original chip first, since it may hold calibration data and MAC addresses, and confirm the label shows hardware version A.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 27 Jul 2024 | Open file on RM Schematics |
| @generalbios | 4 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →