BIOS package for the ASUS H170-PLUS D3 desktop board, compressed in an 8.87 MB ZIP archive. The D3 suffix marks the DDR3 memory variant, distinct from the DDR4 H170-PLUS, so the firmware is not interchangeable. The archive may contain a vendor update file or a full SPI dump; check whether the image includes a Management Engine region before programming. Back up the original chip, match the image size to the flash capacity, and use a hardware programmer when the board will not boot.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (9)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Feb 2021 | Open file on RM Schematics |
| @biosarchive | 16 Jun 2021 | Open file on RM Schematics |
| @BiosSchematicWorld | 10 Dec 2021 | Open file on RM Schematics |
| @BiosSchematicWorld | 20 Dec 2021 | Open file on RM Schematics |
| @pepeelectronica | 23 Apr 2022 | Open file on RM Schematics |
| @generalbios | 8 Oct 2023 | Open file on RM Schematics |
| @laptopschematics | 27 Oct 2023 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 31 Jul 2026 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →