Clean BIOS dump for the ASUS K46CM notebook, supplied as an 8 MB raw binary. In repair circles clean usually means the Management Engine region has been reset or the machine-specific data stripped, although the name does not say which was done. Such an image is written directly to the SPI flash with an external programmer when the board is stuck on a black screen or a boot loop. Read and keep the original chip first so the serial number and other identifiers can be restored afterwards, and check the board revision matches.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @abgm_manutencao_bios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →