Boardview for the Asus K550J and X550JD, tagged Disable RAM Fz, with no revision listed in the name. Its focus is the strap or resistor setup that turns off soldered memory, allowing a board with a defective DRAM chip to boot on a socketed module. The FZ layout opens in boardview software such as OpenBoardView or FlexBV for locating parts, tracing rails and checking shorts. Verify that the revision on your mainboard corresponds to this layout by comparing nearby component placement before soldering.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @schematicslaptop. Enginerys does not host this file.
All sources (9)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @schematicslaptop | 22 Feb 2021 | Open file on RM Schematics |
| @ITHINKHS | 8 Feb 2022 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 23 Apr 2022 | Open file on RM Schematics |
| @boardviewsandachematics | 2 Sept 2025 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
| @schematics_bios | 14 Aug 2026 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.