Firmware for the ASUS K55VD laptop, board revision 3.0, described in the name as tested OK and packed as a 7z archive of about 3.36 MB. It is intended for reprogramming the BIOS flash chip with a hardware programmer when the notebook shows no display, loops on power or has a corrupted image. Unpack it with 7-Zip and check that the dump size matches the flash part fitted on your board. Read and archive the original chip contents first, and verify the motherboard revision printed on the PCB is 3.0.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfiles. Enginerys does not host this file.
How to open a .7z file
High-ratio compressed archive, often used for large BIOS collections.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →