Firmware dump for the ASUS K56CM laptop, motherboard revision 2.0, marked OK, meaning it was reported as a working image. It is an 8 MB binary sized for a 64 Mbit SPI flash chip. Typical use is reprogramming a corrupted BIOS chip with a programmer to fix no-boot, no-display or boot-loop faults. Check that the main board revision printed on the PCB is really 2.0 before writing, keep a backup of the original chip, and expect to re-enter serial or MAC data if the dump came from another unit.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @lappysan. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →