Backup of the BIOS from an ASUS Maximus VII Ranger desktop motherboard, indicated by BKP in the name. The raw 8.00 MB binary matches a 64 Mbit SPI flash. A read taken from a working board like this one can restore a board whose BIOS chip was corrupted by a failed update, either by programming it with a CH341A-type programmer or, where supported, through the board's recovery features. As a backup it may contain the source board's MAC address and serial data, so check those after flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @abgm_manutencao_bios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →