Firmware package for the ASUS P8H61 MX R2.0 motherboard, board revision 2.01, stored as a 3.66 MB RAR archive. The OK mark in the name suggests the dump was tested and found working. It is meant for restoring a dead or bricked board by programming the SPI BIOS chip directly with an external programmer. Check that the revision printed on the PCB is 2.01 before flashing, back up the existing chip contents, and verify that the extracted image size equals the capacity of the installed flash chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 18 Dec 2017 | Open file on RM Schematics |
| @IT_SERVICE_WORLD | 29 Oct 2019 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →