Firmware image for the ASUS UX31E, marked for mainboard revision 3.2 and packed as a raw .bin inside a RAR archive. Technicians use such dumps to recover a board with a corrupted BIOS by reprogramming the SPI flash chip directly with an external programmer. Check that the revision silkscreened on the PCB is really 3.2, since images from other revisions may not boot correctly. Always back up the existing chip contents before erasing, and verify the written data afterwards against the source file.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 13 Mar 2019 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →