Firmware for the ASUS VivoBook 14 X421UA, applicable to board revisions R2.0 and R2.1 according to the name, which also states it is a working image. The RAR is 26.2 MB. Use it to recover a board that is stuck in a boot loop or shows no display by writing the image to the SPI flash chip with a programmer. Check the revision on the PCB is one of the two listed, save the original chip contents first, and make sure the file size matches the chip capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 12 Sept 2023 | Open file on RM Schematics |
| @generalbios | 12 Oct 2023 | Open file on RM Schematics |
| @generalbios | 15 Oct 2023 | Open file on RM Schematics |
| @generalbios | 19 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @generalbios | 29 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Nov 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →