ASUS VivoBook BIOS image shared by the M1603QA and M1403QA models, board revision R2.0, labelled OK as a tested dump. The raw .bin file is 16MB, matching a 128 Mbit SPI flash, and is meant for writing directly with a programmer. It helps revive a laptop that shows no display, will not power on properly or is stuck after a failed update. Confirm the model and R2.0 revision on the PCB, read and keep the original chip as a backup, and verify the write after programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptopomi. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →