ASUS firmware archive aimed at disabling onboard RAM on the X515JA, containing a clean SPD-modified BIOS for the X415JA board revision 3.1 and an X515JA image marked as OK. Such a modification lets a machine with failed soldered memory boot from the SO-DIMM slot alone instead of replacing BGA chips. Before flashing, back up the original SPI contents with a programmer, check that the board revision matches, and verify the image size equals the flash chip capacity so the write completes correctly.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @skclappybios. Enginerys does not host this file.
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →