ASUS X541UA motherboard firmware dump, revision 8.0 board, BIOS version 301 according to the file name. At 8.00 MB it matches an 8 MB SPI flash chip and is intended for programmer-based recovery when a board will not post or shows no display after a failed update. Technicians usually compare it against version 300 when one release misbehaves. Check the PCB revision, back up the existing chip before writing, and verify the write afterwards so a bad flash is not mistaken for a hardware fault.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @BiosSchematicWorld. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →